Issue DOI: doi.org/10.23939/cte2025
5th International Scientific Conference «Chemical Technology and Engineering»: Proceedings. – June 23–26th, 2025, Lviv, Ukraine. – Lviv: Lviv Polytechnic National University, 2025. – 478 p.
The Proceedings of 5th International Scientific Conference “Chemical Technology and Engineering” (CTE-2025):
Loading…
Reload document 
Open in new tab CONTENT
Computer Simulation in the Chemical Technology and Engineering
Airflow and Mass Transfer Modeling as a Tool for Analyzing Drug Aerosolization and Delivery
Tomasz Sosnowski, Agata Dorosz, Arkadiusz Moskal, Maciej Małecki
https://doi.org/10.23939/cte2025.01.030
Pages 30-33
Simulation of the Ultrafiltration Process: Modern Level and Development Trends
Sherhii Huliienko
https://doi.org/10.23939/cte2025.01.034
Pages 34-37
Мathematical Modeling of Heat and Mass Transfer and Phase Transformations in the Condensation Zone of a Heat Pipe
Natalia Sorokova, Konstantin Polovynkin, Julia Kolchyk
https://doi.org/10.23939/cte2025.01.038
Pages 38-42
Topological Optimization of Mass Characteristics of a Lower Limb Prosthesis Stump Receiver Using SolidWorks
Anastasiia Kucherenko, Anastasiia Boshchuk, Volodymyr Hlovatskyi, Vitaliy Korendiy, Volodymyr Moravskyi
https://doi.org/10.23939/cte2025.01.043
Pages 43-46
AI-Driven Predictive Modeling for Biomass Carbon Sequestration and Decarbonization
Mykhailo Hurei
https://doi.org/10.23939/cte2025.01.047
Pages 47-52
Molecular Dynamics Modeling as an Innovative Approach to Solving Problems in Ecology
Hlib Teteriatnykov, Anton Karvatskii, Olena Ivanenko
https://doi.org/10.23939/cte2025.01.053
Pages 53-56
Modeling the Operation of Glass Furnaces in Order to Optimize Technological Processes
Nataliia Zhdaniuk, Oleksii Plemyannikov
https://doi.org/10.23939/cte2025.01.057
Pages 57-60
The Influence of Chan’nel Curvature and Spacer Geometry on Flow Characteristics in Membrane Module Channels
Vitaliy Yasenchuk, Sergiy Huliienko
https://doi.org/10.23939/cte2025.01.061
Pages 61-64
Molecular Modeling of Polymethylmethacrylate-Polyaniline Composites and Study of its Properties
Volodymyr Dutka, Yaroslav Kovalskyi, Halyna Halechko, Oleh Khamar
https://doi.org/10.23939/cte2025.01.065
Pages 65-68
Development, Energy and Resource Saving in the Chemical and Food Technologies
Design and Development of a High-Concentration Aqueous Ammonia Solution Production Plant
Oleksandr Mandryka, Maksym Skydanenko, Oleksandr Liaposhchenko
https://doi.org/10.23939/cte2025.01.070
Pages 70-77
Interrelation of Quality Indicators of Coal Charge and Blast Furnace Coke
Illia Avdeiuk, Denys Miroshnychenko
https://doi.org/10.23939/cte2025.01.078
Pages 78-81
Development and Optimization of Lithium Aluminosilicate Glass-Ceramic Materials with High β-Spodumene Content for Armor Protection
Sviatoslav Riabinin, Artem Zakharov, Mykyta Maistat
https://doi.org/10.23939/cte2025.01.082
Pages 82-85
Kinetics of Filtration Drying of Wild Carrot Pomace
Alina Denysiuk, Volodymyr Atamanyuk
https://doi.org/10.23939/cte2025.01.086
Pages 86-89
Development of Bio-Based Epoxy Thermosetting Materials Based on Imine Bonds
Anastasiia Pidvorotnia, Roxana Dinu, Sandu Cibotaru, David D. Swanson, Alice Mija
https://doi.org/10.23939/cte2025.01.090
Pages 90-93
Research on a Combined System with a Hybrid Solar Collector
Stepan Mysak, Stepan Shapoval, Anna Hyvliud
https://doi.org/10.23939/cte2025.01.094
Pages 94-98
Optimizing Coal Fine Properties for Industrial Applications Through Chemical Treatments
Nataliya Korol, Viktor Yankovych
https://doi.org/10.23939/cte2025.01.099
Pages 99-103
Preparation and Structure of Chitosan-Based Porous Scaffolds for Potential Application in the Treatment for Diabetic Foot Complications
Zoia Haholkina, Maite Rico, Rebeca Bouza
https://doi.org/10.23939/cte2025.01.104
Pages 104-107
Plant Oil-Based Polymers: Synthesis, Structure, and Temperature-Responsive Properties Near Physiological Temperatures
Anastasiia Chebotar, Bohdan Domnich, Yurij Panchenko, Volodymyr Donchak, Yurij Stetsyshyn, Andriy Voronov
https://doi.org/10.23939/cte2025.01.108
Pages 108-111
Mass Transfer During the Dissolution of Ammonium Tetrafluoroborate, Based on the Theory of Locally Isotropic Turbulence
Oleksandr Kuzyk, Yaroslav Gumnitsky
https://doi.org/10.23939/cte2025.01.112
Pages 112-117
Pressure Influence on the Carbon Gasification Process
Nazar Lysyy, Andriy Helesh, Vasyl Popovych
https://doi.org/10.23939/cte2025.01.118
Pages 118-122
QM/MM Study of the Cyclization Reaction Mechanism for Pimelic o-Aminobenzamide Histone Deacetylase (HDAC) Inhibitor 4b
Olena Klenina, Laura Márquez Cantudo, Claire Coderch, Beatriz de Pascual-Teresa Fernandez
https://doi.org/10.23939/cte2025.01.123
Pages 123-131
Lignocellulous Raw Materials and Its Wastes Transformation Into Value-Added Products
Bohdan Korinenko, Tetiana Tkachenko, Oleksandr Pavliuk, Dmytro Kamenskyh, Vitalii Yevdokymenko
https://doi.org/10.23939/cte2025.01.132
Pages 132-137
Diffusive Mass Transfer During Filtration Drying of Match Splints
Tetiana Kuzminchuk
https://doi.org/10.23939/cte2025.01.138
Pages 138-141
Evaluation of the Effect of Technical Lignin on the Properties of Petroleum Bitumen
Myroslava Donchenko, Yuriy Prysiazhnyi, Andriy Nagurskyy, Taras Chipko
https://doi.org/10.23939/cte2025.01.142
Pages 142-145
Synthesis and Properties of Latex Composites Filled with PVA Hydrogel and Keratin
Oleksandra Dzeikala, Mirosława Prochoń
https://doi.org/10.23939/cte2025.01.146
Pages 146-149
Formation of Specific Electrical Resistance of Blast Furnace Coke Under the Influence of Raw Materials and Technological Factors of Its Production
Yevhen Soloviov, Denys Miroshnychenko
https://doi.org/10.23939/cte2025.01.150
Pages 150-153
Intensification of Evaporation of Sulfuric Acid Solutions
Andriy Helesh, Roksoliana Bukliv, Yaroslav Kalymon, Oksana Kurylets
https://doi.org/10.23939/cte2025.01.154
Pages 154-159
Mechanical Properties of Biodegradable Films Based on Polyvinyl Alcohol and Starch
Oleksandra Krykhovets, Vyacheslav Repeta
https://doi.org/10.23939/cte2025.01.160
Pages 160-163
Processing of Petroleum-Containing Waste by Low-Temperature Pyrolysis Method
Oleg Grynyshyn, Andrii Kopach, Yuriy Znak, Taras Chervinskyy
https://doi.org/10.23939/cte2025.01.164
Pages 164-167
Study of Mechanical Properties of Starch-Based Biodegradable Films and Their Degradation Under UV Radiation
Valentyna Slobodianyk
https://doi.org/10.23939/cte2025.01.168
Pages 168-171
The Innovations, Nanotechnologies, and Catalysis in the Chemical and Food Industries
Study of Gas-Dynamic Throttle Elements as Sensors for Nanotechnology Processes
Ivan Stasiuk, Ihor Dilai, Roman Brylynskyi, Solomiia Markiv
https://doi.org/10.23939/cte2025.01.173
Pages 173-179
Innovative Techniques For Producing Yogurts With Increased Nutritional Value
Dariia Kichura, Roman Subtelnyy
https://doi.org/10.23939/cte2025.01.180
Pages 180-183
Study of the Wine Clarification Process with Bentonite
Khrystyna Frys, Oksana Nahurska, Olha Fedotova
https://doi.org/10.23939/cte2025.01.184
Pages 184-188
Sol-Gel Synthesis of Organic/Inorganic Materials with High Proton Conductivity
Mariia Zhyhailo, Iryna Yevchuk, Oksana Makota
https://doi.org/10.23939/cte2025.01.189
Pages 189-194
Hydrothermal and Mechanochemical Modification as a Tool for Preparing ZrO2 with Desired Physicochemical Characteristics and Improved Photocatalytic Properties
Volodymyr Sydorchuk, Joanna Olszowka, Svitlana Khalameida, Svitlana Levytska, Stefan Vajda
https://doi.org/10.23939/cte2025.01.195
Pages 195-198
Crystallization Parameters of CsPbBrCl2 Melt
Oleh Kopach, Vasylyna Kopach, Taras Diiakoniuk, Petro Fochuk
https://doi.org/10.23939/cte2025.01.199
Pages 199-203
Effect of Chemical Etching on Photoinduced Modulation of Subterahertz Radiation by Crystalline Germanium
Roksoliana Bukliv, Oksana Balaban, Bohdan Venhryn, Dmytro Vynnyk, Andriy Danylov
https://doi.org/10.23939/cte2025.01.204
Pages 204-208
Temperature Influence on the Rheological Properties of C9 Hydrocarbon Resin Solutions
Roman Subtelnyy, Dariia Kichura, Bohdan Dzinyak
https://doi.org/10.23939/cte2025.01.209
Pages 209-212
Studying the Rheological Behaviour of Polyamide Nanocomposites
Natalia Chopyk, Victoria Zemke, Mykhaylo Bratychak
https://doi.org/10.23939/cte2025.01.213
Pages 213-216
Characterization of Miscanthus Biomass Waste -Derived Biochar Produced by Oxydative Pyrolysis: Implications for Carbon Sequestration
Valentyna Pidlisnyuk, Tatyana Stefanovska, Volodymyr Klius, Larysa Borysenko, Artem Medkov
https://doi.org/10.23939/cte2025.01.217
Pages 217-221
Prospects of Sulfur Nanoparticles Application in the Technology of Food Emulsion Systems
Erika Boichuk, Anastasiia Sachko, Viktoriia Pylypko, Yuriy Khalavka
https://doi.org/10.23939/cte2025.01.222
Pages 222-227
La-Modified Cu/ZnO/Al2O3 System as the Modern Heterogeneous Catalysts for Water-Gas Shift Process
Pawel Kowalik, Katarzyna Anotniak-Jurak, Anna Mrozek, Piotr Baran
https://doi.org/10.23939/cte2025.01.228
Pages 228-231
New Types of Cold-Applied Bituminous Roofing Materials
Dmytro Aleksandrov, Yuriy Khlibyshyn, Volodymyr Yuzyfyshyn, Andrii Nahurskyi, Oleg Grynyshyn
https://doi.org/10.23939/cte2025.01.232
Pages 232-235
Luminescent Determination of 4-Nitrophenol in Water Using AgInS2 and CuInS2 Nanoparticles
Vasylyna Kopach, Yuriy Khalavka, Anastasiia Piasetska
https://doi.org/10.23939/cte2025.01.236
Pages 236-239
Selenium-Modified Microgels: Novel Catalysts for Cross-Phase Oxidation of Aromatic Aldehydes
Anastasiia Pavliuk, Oliver Fiukowski, Volodymyr Ivasiv, Roman Nebesnyi, Andrij Pich
https://doi.org/10.23939/cte2025.01.240
Pages 240-244
Tuning Excited-State Proton Transfer in 3-Hydroxyflavones by Inclusion into β-Cyclodextrins
Arsenii Snizhko, Liudmyla Chepeleva, Eugene Gladkov, Alexander Kyrychenko
https://doi.org/10.23939/cte2025.01.245
Pages 245-249
Design of Polyfunctional Catalysts for C2, C4 (Bio)alcohols’ Conversion into Valuable Alkenes and Oxygenates
Arsenii Snizhko, Liudmyla Chepeleva, Eugene Gladkov, Alexander Kyrychenko
https://doi.org/10.23939/cte2025.01.250
Pages 250-253
Degradation Changes in the Crystal and Electronic Structure of Lead Iodide Perovskite
Volodymyr Karbivskyy, Svitlana Smolyak, Arsen Soroka, Nazar Shvachko, Oleksii Ivanov
https://doi.org/10.23939/cte2025.01.254
Pages 254-257
Investigation of Suspensions of Mixed Iron Oxide/Manganese Oxide and Iron Oxide/Cobalt Oxide Nanoparticles in Aqueous Surfactant Solutions and Their Use for Mixer Studies in Liquids Feeds
Tamara Sakhno, Valentina Panchenko, Nikolay Barashkov, Yuriy Sakhno
https://doi.org/10.23939/cte2025.01.258
Pages 258-261
Catalytic Properties of CeO2 and Its Nanocomposites with SBA-15 Mesoporous Molecular Sieve in Cyclic Carbamates Production from CO2 and Aminoalcohols
Mykhailo Kurmach, Dmytro Kyryliuk, Pavlo Yaremov, Oleksiy Shvets, Nataliya Shcherban
https://doi.org/10.23939/cte2025.01.262
Pages 262-267
Research on the Cracking of Heavy Oil Fractions Activated by Atmospheric Oxygen
Vasyl Konyk, Yuriy Khlibyshyn
https://doi.org/10.23939/cte2025.01.268
Pages 268-271
Effect of Acrylic Monomer Formulation on Photocuring and Water Swelling Ability of PVA Hydrogel
Vasyl Vaskiv, Dmytro Saiuk, Viktor Tokarev
https://doi.org/10.23939/cte2025.01.272
Pages 272-278
Preparing the Organic-Inorganic Hybrid Perovskites for the Effective Solar Cell
Volodymyr Karbivskyy, Oleksii Ivanov, Nazar Shvachko, Nataliia Kurgan, Serhii Shulyma
https://doi.org/10.23939/cte2025.01.279
Pages 279-284
Constant Magnetic Field Influence on (Meth)Acrylic Esters Polymerisation in the Presence of Polyvinylpyrrolidone
Galyna Dudok, Natalia Semenyuk, Taras Behei, Volodymyr Skorokhoda
https://doi.org/10.23939/cte2025.01.285
Pages 285-290
Fundamentals of the Technology of Obtaining Interactive Materials for Use in Catalysis and Biosensors in the Context of Food Freshness Assessment
Iryna Kirina, Khrystyna Frys, Oksana Nahurska, Volodymyr Ivasiv, Roman Nebesnyi
https://doi.org/10.23939/cte2025.01.291
Pages 291-294
Influence of Dispersion Medium Parameters on Suspension Polymerization of Methacrylic Esters in Presence of Polyvinylpyrrolidone
Nataliya Semenyuk, Galyna Dudok, Volodymyr Malynovskyi, Nazar Shalata, Volodymyr Skorokhoda
https://doi.org/10.23939/cte2025.01.295
Pages 295-300
Optimization of Biochemical Processes and Bioengineering
Exploring the Potential of Organophosphorus Compounds as Chelators for Enhancing Zinc Bioavailability in Agriculture
Magdalena Tymoszewicz, Ewelina Klem-Marciniak, Marta Huculak-Mączka, Tomasz Olszewski
https://doi.org/10.23939/cte2025.01.302
Pages 302-307
Biocatalytic Method for the Synthesis of Enantiomerically Pure β-Methyl-phenylethylamines
Oleh Faiziiev, Anastasiia Kolodiazhna, Dmytro Prysiazhnuk
https://doi.org/10.23939/cte2025.01.308
Pages 308-312
Enhancing Mechanical Properties of Biopolymer-Based Composites: The Influence of Organic and Inorganic Additives
Szymon Szczepanik, Mirosława Prochoń
https://doi.org/10.23939/cte2025.01.313
Pages 313-317
Organs-on-a-Chip in the Study of Ophthalmic Diseases
Marharyta Chalenko, Olena Golembiovska
https://doi.org/10.23939/cte2025.01.318
Pages 318-323
Enzymatic Synthesis is a Method for Obtaining Optically Active Compounds
Anastasiia Kolodiazhna
https://doi.org/10.23939/cte2025.01.324
Pages 324-331
Preparation of Enantiomerically Pure 3-Heteryl-2-Methylpropanoic and 3-Heterylbutanoic Acids by Enzymatic Kinetic Resolution
Oleh Faiziiev, Anastasiia Kolodiazhna, Dmytro Prysiazhnuk
https://doi.org/10.23939/cte2025.01.332
Pages 332-336
The Content of Antocyanins and Ascorbic Acid in Extract of Malva Sylvestris L. Obtained by Enzyme-Assisted Extraction
Anastasiia Kulakivska, Roksolana Konechna
https://doi.org/10.23939/cte2025.01.337
Pages 337-340
Green Chemistry
Design and Research of Eco-Friendly Biodegradable Composites Based on Renewable Biopolymer Materials and Reed Waste
Artem Kariev, Volodymyr Lebedev, Yevgen Sokol, Magomediemin Gasanov, Аnna Cherkashina
https://doi.org/10.23939/cte2025.01.342
Pages 342-348
The Analysis of Green Metrics Indices of Chemical Technologies: Accountability of Environmental Performance and Sustainability Assessments
Marharyta Radomska, Oksana Tykhenko
https://doi.org/10.23939/cte2025.01.349
Pages 349-353
Comparison of Selected Physicochemical Properties of Green Clay After Mechanochemical Treatment with the Finished Composite Based on Green Clay and Hydroxyapatite Obtained by the Wet Method
Klaudia Kowalska, Ewa Skwarek
https://doi.org/10.23939/cte2025.01.354
Pages 354-359
Closing the Recycling Loop of PEM Electrolyzer: Synthesis of Ir Precursor from Spent Electrocatalyst
Lesia Sandig-Predzymirska, Alexandros Charitos
https://doi.org/10.23939/cte2025.01.360
Pages 360-363
Animal Fats and Vegetable Oils – Promising Resources for Obtaining Effective Corrosion Inhibitors for Oil Refinery Equipment
Serhiy Pyshyev, Oleksandr Romanchuk, Petro Topilnytskyy, Viktoriya Romanchuk, Denis Miroshnichenko, Yurii Rohovyi, Hennadii Omelianchuk, Yurii Parkhomov
https://doi.org/10.23939/cte2025.01.364
Pages 364-369
Alternative and Non-Conventional Energy Sources
The Characteristics of Banana Peel-Derived Carbon and Its Potential Utility in Energy Storage Devices
Xymena Gross, Beata Kurc
https://doi.org/10.23939/cte2025.01.371
Pages 371-374
Methods of Biogas Purification and Enhancement
Pavlo Holubiev, Andriy Slyuzar
https://doi.org/10.23939/cte2025.01.375
Pages 375-380
Pyrolysis of Waste Tires: Product Characteristics and Industrial Applications
Bohdan Korchak, Serhiy Pyshyev, Yurii Lypko
https://doi.org/10.23939/cte2025.01.381
Pages 381-384
Investigation of the Energy Characteristics of Sunflower Stalks and Their Separated Tissues as Lignocellulosic Raw Materials for Solid Biofuel Production
Diana Kindzera, Roman Hosovskyi, Viktoria Kochubei
https://doi.org/10.23939/cte2025.01.385
Pages 385-388
The Influence of Dehydration Mode on the Duration of the Drying Process of Protein-Containing Raw Materials of Animal Origin
Zhanna Petrova, Kateryna Samoilenko, Yuliia Novikova, Pavlo Petrov, Oleksandr Yurchak
https://doi.org/10.23939/cte2025.01.389
Pages 389-394
The Influence of Polyethylene on the Thermophysical Properties of Fuel from Municipal Solid Waste
Tetiana Korinchevska, Viacheslav Mykhailyk, Yurii Sniezhkin
https://doi.org/10.23939/cte2025.01.395
Pages 395-398
Ecology and Sustainable Development. Environmental Protection
Increase the Reliability and Accuracy of Assessing the Ecological State of a Surface Water Body’s Sub-Basin
Svitlana Kovalenko, Roman Ponomarenko, Oleg Tretyakov
https://doi.org/10.23939/cte2025.01.400
Pages 400-406
Fusel Oil and the Ecology of Road Transport
Anatoliy Ludyn, Viktor Reutskyy, Volodymyr Reutskyy
https://doi.org/10.23939/cte2025.01.407
Pages 407-4015
Evaluation of the Influence of Biosurfactants, Microbial Preparation, Sorbents on the Adaptive Capacity of Rye During Growth on Oil-Contaminated Soil
Andriy Banya, Tetyana Pokynbroda, Nataliia Koretska, Olena Karpenko, Ihor Bobalo, Vira Lubenets
https://doi.org/10.23939/cte2025.01.416
Pages 416-420
The impact of Biochar Amendments and Biostimulant on Soil Nematodes and Biomass Yield of Miscanthus on Poor-Nutritionally Soils of Post-Military Areas in Kyiv Region
Anastasiia Husieva, Tatyana Stefanovska, Andrzej Skwiercz, Vitaliy Stadnik, Irina Artemchuk
https://doi.org/10.23939/cte2025.01.421
Pages 421-427
Methods of Initial Assessment for Safety Secondary Application of Duroplastic Waste
Matusiak Alicja, Zawadzka Ewa, Wacławek Stanisław, Silvestri Daniele, Alicja Wypiór
https://doi.org/10.23939/cte2025.01.428
Pages 428-435
State Policy in the Field of Ecologization Trade-Logistics Centers
Oleh Nahurskyi, Oleh Semenchuk
https://doi.org/10.23939/cte2025.01.436
Pages 436-440
On Techno-Economic Analysis of Rapid Filtration of Groundwater with High Iron Content
Vadym Poliakov, Serhii Martynov
https://doi.org/10.23939/cte2025.01.441
Pages 441-445
The XPS-Revealed Difference in the Molecular Sorption Mechanism of Se(IV) and Se(VI) on Mg-Al-CO3 Layered Double Hydroxides (LDHs) Focusing on the Material Surface Speciation
Natalia Chubar
https://doi.org/10.23939/cte2025.01.446
Pages 446-451
Intelligent Flowmeter Based on the Film Method of Gas Flow Measurement for Environmental Monitoring
Ivan Stasiuk, Ihor Dilai, Solomiia Markiv, Valentyn Shevchuk, Oksana Parneta
https://doi.org/10.23939/cte2025.01.452
Pages 452-458
Granulated Slow-Release Fertilizers Based on Urea and Flue Gas Desulfurization Gypsum
S. Schab, M. Borowik
https://doi.org/10.23939/cte2025.01.459
Pages 459-463